Angle Broom



  • Direct drive design with replaceable drive components
  • 160 degree hood
  • Hydraulic pressure relief valves on motor allows broom to operate in both directions
  • Standard with 32" diameter poly/wire brush wafers, all poly and all wire available
  • Centering swing linkage better centers broom in front of loader when angled
  • Designed for easy exchange of wafers, no disconnecting of hydraulic hoses
  • Broom is standard with manual angle, hydraulic angle with electric control optional
  • Recommended for loaders with operating capacities greater than 1500 lbs.
  • Optional Hydraulic Angle
    • One cylinder hydraulic angle by the use of an electric valve
    • Uses either loader electrical control system or add on electrical control
  • Optional Deflector
    • Bolts onto broom using existing mount holes
    • Covers additional 30 degrees to help limit flying material
    • Deflector can be pinned up in storage position, without removal

Model VAB60 VAB72 VAB84 VAB96
Sweeping Width, Straight 60" 72" 84" 96"
Overall Width 69.1" 81.1" 93.1" 105.1"
Rotation Angle 27° 27° 27° 27°
Sweeping Width, Full Angle 53.5" 64.2" 74.8" 85.5"
Overall Width, Full Angle 73.4" 83.9" 94.3" 105.4"
Recommended Flow Rate 15-25 gpm 15-25 gpm
Maximum Operating Pressure 3500 psi 3500 psi
Number of 32" Diameter Wafers 30 36 42 48
Approx. Weight 970 lbs 1035 lbs 1095 lbs 1160 lbs





Pick Up Broom



  • Can operate broom forward and reverse
  • Direct drive design with replaceable drive components
  • Standard 5/8" x 6" bolt on reversible wear edge
  • Standard with 26" diameter poly/wire brush wafers , all poly and all wire available
  • Designed for easy exchange of wafers, no disconnecting of hydraulic hoses
  • Hood frame adjusts for bristle wear
  • Optional gutter brush available
  • Recommended for loaders with operating capacities greater than 1500 lbs.

Model PUB60 PUB72 PUB84
Sweeping Width 60" 72" 84"
Overall Width 67.8" 79.8" 91.8"
Overall Height 31.3" 31.3" 31.3"
Overall Depth 62.4" 62.4" 62.4"
Recommended Flow Rate 15-25 gpm
Maximum Operating Pressure 2000-3400 psi
Number of 26" Diameter Wafers 29 35 41
Approx. Weight 990 lbs 1120 lbs 1250 lbs





Dozer Blade



  • Adjustable skid shoes
  • 5/8" x 8" reversible wear edge
  • 2 cylinder hydraulic angle, one cylinder tilt
  • Heavy duty frame with 5/16" thick moldboard
  • Hydraulic angle and tilt by the use of an electric valve and one loader valve
  • Uses either loader electrical control system or add on electrical control
  • Recommended for loaders with operating capacities greater than 1800 lbs.

Model DZR72 DZR84 DZR96
Overall Blade Width 74" 86" 98"
Blade Height 25.8"
Overall Height 28.1"
Overall Depth 38.0"
Blade Angle +/- 30°
Width at Full Angle 64.1" 74.5" 84.9"
Blade Oscillation +/- 10°
Moldboard Thickness .31"
Cutting Edge 5/8 x 8 Bolt On
Approx. Weight 1510 lbs 1575 lbs 1640 lbs



*Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.
Contact Ag Industrial for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@agindustrial.com
 Industrial Equipment
Ag Industrial Main Page