Coneqtec Universal

NH2500 Series Auxiliary Hydraulic Kit

New Holland Auxiliary Hydraulic Kit for E, LB and LB.B Models

The NH2500 Series Auxiliary Hydraulic Kit was designed by Coneqtec Corporation specifically for the New Holland E and LB lines of backhoes to operate single-direction flow attachments for equipment such as breakers and compactors. Our standard kit includes steel tubing and hoses mounted on the outside of the boom to look like your preexisting plumbed tractors. A dash-mounted on/off switch, coupled with a floor foot switch, control power to the attachment. In addition to standard plumbing at the end of the boom, you can have your hoses run over the top to a quick disconnect bracket.

Features
  • Kit specifically designed for single-direction flow operation
  • Large capacity valve with six flow settings: 8, 13, 18, 22, 26, 30
  • Flow adjustment remotely located at left tractor step
  • Pilot relief valve adjustable to match attachment
  • Flow priority given to attachment
  • Boom plumbing externally mounted
  • Two plumbing configuration options: top of boom or to dipper
  • Affordable optional circuit for handheld attachments
  • Cab foot switch control
  • Quick disconnects available

Kit Options
A B  
NH2500 NH2500-B Base Kit
NH2510 NH2510-B Base Kit w/ dipper brackets*
NH2520 NH2520 Handheld Add-on**
NH2530 NH2530 Handheld Only
A) E Series and early LB 75 and LB 115 Series
B) LB 90, LB110, LB 75.B and LB 115.B Series
*Plumbed mid dipper with JIC-12 bulkhead adapters w/brackets
**Handheld Add-on must be ordered with either base kit



Bucket Broom

Model LPB-60 LPB-72
Sweep Width 60" 72"
Weight 625 lbs 750 lbs
Capacity 13 ft³ 16 ft³
Broom Diameter 18" 18"
Bristle Material Oriented Poly
Broom RPM @ 10 gpm 96 rpm
Min/Max gpm 8-25 gpm
Min/Max psi 2000-3500 psi
Min loader lift capacity 1200 lbs 1700 lbs

  • Low Profile High Efficiency - Maximizing efficiency in the forward sweeping direction, the low profile brush easily lifts the swept material over the brush. Operation in either forward to rearward direction.
  • Low Profile High Visibility - Improves efficiency along with greatly increasing visibility of road surface over front of the broom.
  • Surface Following Design - Coneqtec/Universal sweeper buckets are all designed using the proven floating brush design allowing the brush to follow road surface for better sweeping action.
  • Dual Direction Hydraulic Drive - Powered by a dual direction direct drive system that uses a hydraulic motor to drive the broom at the appropriate speed. This feature allows for both over the brush sweeping in the forward direction or dust pan style sweeping in the rearward direction.
  • High Density Oriented Strand Bristles - High density low profile brush is constructed in a unique process that orients each bristle with its heaviest and stiffest side in the direction of rotation for improved sweeping action.
  • Easy Brush Height Adjustment - Allows quick and precise adjustment of the brush height to maximize sweeping efficiency and provides maximum life of the bristles.
  • Options - Coneqtec/Universal pickup buckets can be equipped with a wide range of options including gutter broom, caster wheels, sprinkler system, brush type and configuration.



Pattern Mill

Model PM-400
Cutting Width 16"
Cutting Depth 0-6"
Tilt Capability (right/left) 0-15"
Side Shift Travel 0-24"
Weight 1900 lbs
Hydraulic HP Range 45-81 hp
# Teeth 80
Optional Widths 3"-18"

  • Hydraulic Pattern Control - moves the cutting wheel in the prescribed pattern eliminating the need for cam wheel arrangement prone to slippage or material build up.
  • Interchangeable Pattern Plate - designed with interchangeable hydraulic actuator plates allowing the depth and length of cut to be varied for multiple applications.
  • Interchangeable Pattern Sprockets - Used in conjunction with interchangeable pattern plates, this allows the distance between the pattern cuts to be varied.
  • Interchangeable Drums - A full line of interchangeable drum widths are available to allow the pattern mill to cut rumble strips, make recessed reflector cuts, and recessed white line cuts.



*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.

Contact A.B.C. Groff for more product information.
110 South Railroad Ave.
New Holland, PA 17557
Email: sales@abcgroff.com		Phone: (717) 354-4191
Toll free: 1-800-346-8319
Fax: (717) 355-2272
 Industrial Main Page

ABC Groff Main Page