Precision Farm Machinery

Center Cut Power Ditchers

The rugged PFM power ditcher is the simplest, economical approach to field water control. Designed to spread soil up to 30 ft. and dig ditches up to 12” deep in one pass. Excellent performance in most soil conditions and all types of crops.

Model	400-10	400-20	400-30
Minimum PTO HP	35 hp	35 hp	35 hp
PTO tractor yoke	1-3/8 6 spline 540 RPM	1-3/8 21 spline 1000 RPM	1-3/4 20 spline 1000 RPM
Drive shaft	180 HP shear pin with regreaseable slide
Cutting head	Equipped with four reversible high carbon blades, adjustable from 18" to 20" diameter
Hitch	Fits category II & III standard or quick hitch systems
Weight	Approx. 850 lbs.

DURABILITY: - Rugged "A" frame type design constructed from high strength tube. The unique high HP belt drive is equipped with a banded belt, taper lock sheaves with self-adjusting spring tensioning system. Rotor has labyrinth shielded bearings, four reversible cutting blades and is fully shielded. These features make the PFM power ditcher the strongest and most durable on the market. CONVENIENCE: - The simple spring tensioned self-adjusting belt drive assures proper tension, provides the user with little downtime for service or maintenance. No more difficult alignment, adjusting, and oil leak problems normally caused by high RPM chain drive systems. OPTIONAL EQUIPMENT: - The ripper shank is excellent in any condition. The results are reduced machine and blade wear and faster ground speed.

Offset Cut Power Ditchers

The rugged PFM power ditcher is the simplest, economical approach to field water control. Designed to spread soil up to 30 ft. and dig ditches up to 12” deep in one pass. Excellent performance in most soil conditions and all types of crops.

Model	400-40	400-50	400-60
Minimum PTO HP	35 hp	35 hp	35 hp
PTO tractor yoke	1-3/8 6 spline 540 RPM	1-3/8 21 spline 1000 RPM	1-3/4 20 spline 1000 RPM
Drive shaft	180 HP shear pin with regreaseable slide
Cutting head	Equipped with four reversible high carbon blades, adjustable from 18" to 20" diameter
Hitch	Fits category II & III standard or quick hitch systems
Weight	Approx. 900 lbs.

DURABILITY: - Rugged "A" frame type design constructed from high strength tube. The unique high HP belt drive is equipped with a banded belt, taper lock sheaves with self-adjusting spring tensioning system. Rotor has labyrinth shielded bearings, four reversible cutting blades and is fully shielded. These features make the PFM power ditcher the strongest and most durable on the market. CONVENIENCE: - The simple spring tensioned self-adjusting belt drive assures proper tension, provides the user with little downtime for service or maintenance. No more difficult alignment, adjusting, and oil leak problems normally caused by high RPM chain drive systems. OPTIONAL EQUIPMENT: - Cutting coulter, ripper shank and/or gauge wheel attachment. Excellent in most soil conditions. The results are reduced machine and blade wear and faster ground speed.

Offset Cut Power Ditchers

The rugged PFM Disc Ditcher will cut a single ditch in most heavy clay or rocky soil conditions. It is the most durable ditcher on the market and is built to stand up to extra abuse. Designed to cut down irrigation levees or to cut a uniform ditch up to 20 inches wide by 12 inches deep promoting water control and increasing yields for all types of crops.

Hitch: Category II & III standard or quick hitch system Blade: ½" thick X 24" diameter with adjustable pitch and width Hub: 6 bolt 6" bolt circle rated for 4570 lbs

*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.

Contact A.B.C. Groff for more product information. Phone: (717) 354-4191 Toll free: 1-800-346-8319 Fax: (717) 355-2272 Email: sales@abcgroff.com	Industrial Equipment
	ABC Groff Main Page