| Engine |
C175 |
| Manufacturer |
New Holland |
| Model Number |
N844LT, turbocharged |
| Air Cleaner |
Dual stage,
dry element filter |
| Bore & Stroke |
3.3" x 3.9" |
| Number of Cylinders |
4 |
| Displacement |
135 in³ |
| Fuel |
Diesel |
| Horsepower @ 2900 rpm |
| Gross |
60 hp |
| SAE net |
56 hp |
| Speeds |
| Fast, no load |
3130-3180 rpm |
| Idle, no load |
1150 rpm |
| Peak Torque @1700 rpm |
128 ft-lb |
| Torque Rise |
20° |
| Capacities |
C175 |
| Cooling System |
4.5 gal |
| Engine crankcase |
8.4 qt |
| Fuel tank |
14.4 gal |
| Hydraulic oil system |
8.6 gal |
| Power Train |
C175 |
Hydrostatic piston type
pumps displacement |
2.48 in³ |
Hydrostatic axial piston type
motors @ max displacement |
3.1 in³ |
| Torque at max displacement |
3055 ft-lb |
| Undercarriage |
| System |
High drive offset
tread pattern |
| Idlers/Rollers per side |
2/3 |
| Ground pressure (12.6") |
5.3 psi |
| Electrical |
C175 |
| Alternator |
55 amp, solid-state
rectifier and regulator |
| Battery |
12-volt 650 cca @ 0°F |
| System protection |
15 amp circuit breaker |
|
| Performance |
C175 |
| Breakout Force |
| SAE Bucket |
4312 lb |
| SAE Boom |
3003 lb |
| Cycle times |
| Raising time |
3.1 sec |
| Dumping time |
2.3 sec |
| Lowering time |
2.1 sec |
| Retract time |
1.5 sec |
| Ground speed max |
| Low range |
5.6 mph |
| High range |
7.4 mph |
| Operating loads |
| 35% of Tipping Load |
2200 lb |
| 50% of Tipping Load |
3150 lb |
| Hydraulic limitation |
2200 lb |
| Operating weight (SAE) |
7535 lb |
Tipping Load
without wieghts |
6300 lb |
| Hydraulics |
C175 |
| Boom Cylinders |
| Make |
NH double acting |
| Bore & stroke |
2.5" x 21.25" |
| Rod size |
1.38" |
| Bucket Cylinders |
| Make |
NH double acting |
| Bore & stroke |
2.25" x 17.88" |
| Rod size |
1.25" |
| Control valve |
Three spool,
open center |
| Filtration |
Spin-on filter |
| Hydraulic pump |
Gear type, 17.2 gpm |
| High-flow hydraulic (opt) |
30.3 gpm |
| Relief pressure setting |
2500 psi |
Click here for Dimensions |
