Carbide Cutter Tree Cutter

NEW Generation 2
Blades never need to be sharpened!
Selectively cuts trees and brush without expensive hand labor. The material can be rough-cut or finely processed to fit your job requirements.

Works on a Minimum of 48 Hydraulic Horsepower
Aggressively cuts & mulches up to 6 inch diameter material with as little as 48 hydraulic horsepower. Intermittently cuts up to 10" or larger diameter material.

Model 51CCHS 61CCHS
Width of Cut 51" 61"
Overall Width 68" 78"
Overall Height 54" 54"
Overall Depth 69" 69"
Number of Knives 30 36
Weight 2145 lbs 2277 lbs

Features

  • Body Design with Relocated Rotor
  • Two-stage Cutting Chamber
  • Counter Teeth in Cutting Chamber
  • Built-in Recutter Bar at Discharge
  • Optional Bolt-in 2nd Shear Bar
  • Machined Bearing Anti-wrap
  • Low Profile Skid Shoe
  • Adjustable Tree-pusher Bar
  • Welded Claw Hooks on Pusher Bar
  • Redesigned Spiral Tooth Pattern
  • Optional Carbide Planer Teeth
  • Optional Cylinders on Pusher Bar
  • Carbide Teeth with Forged Steel Holders
  • Efficient Spiral Carbide Tooth Pattern
  • Premium "HARDOX" Swedish Steel Housing
  • Standard High-efficiency Gear-type Motor
  • Optional High Pressure Piston-type Motor
  • Dual Cross-over Relief Protection
  • Heavy-duty, Bearing Block
  • 1700 rpm - 17 inch Diameter Rotor
  • 2 3/16 inch Rotor Bearings
  • On Board PSI Gauge to Monitor Capacity
  • Steel Deflector Chains
  • 3-Groove Banded Belt
  • Taper-lock Sheaves
  • Spring-loaded Belt Tightener
  • Skid Shoes - Adjustable 1 to 3 inches
  • Diagnostic Kit (tachometer & pressure gauge)
  • Charcoal Grey Paint
  • Hoses & Hose Holder are included



TimberAx Tree & Brush Shredder

  • Efficiently Cuts & Mulches Up to 6" Diameter Material
  • Intermittently Cuts Up to 10" or Larger Diameter Material
  • Cuts Trees, Brush or Grass with Same Knives

Features

  • Front-mounted, Hydraulic-driven
  • Universal Skid-steer Mount
  • Adjustable Tree-pusher Bar
  • Adjustable Shear Bar
  • 1700 rpm - 17 inch Diameter Rotor
  • Heat-treated, Sharpened Blades
  • Rigid, Pocket-style Knife Mounts
  • Premium Strength Steel Body & Rotor
  • 2 3/16 inch Rotor Bearings
  • Bearing Anti-wrap Protection
  • Heavy-duty, Bearing Block
  • Standard High-efficiency Gear-type Motor
  • Optional High Pressure Piston-type Motor
  • Dual Cross-over Relief Protection
  • Pressure Gauge to Monitor Capacity
  • Steel Deflector Chains
  • 2-Groove Banded Belt
  • Taper-lock Sheaves
  • Spring-loaded Belt Tightener
  • Skid Shoes - 1 inch Lift
  • Spare Parts Kit
  • Tachometer
  • Charcoal Grey Paint

Model 53AX 63AX 73AX 83AX
Width of Cut 53" 63" 73" 83"
Overall Width 71.5" 81.5" 91.5" 101.5"
Number of Knives 12 14 16 18
Weight 1850 lbs. 2025 lbs. 2200 lbs. 2375 lbs.


*Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.
Contact Ag Industrial for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@agindustrial.com
 Industrial Equipment
Ag Industrial Main Page