 |
 |
Quick-Attach Utility Trench Paver
 |
|
| The model UP-1 trench paver was designed by a Utility Contractor to allow quick and neat trench paving. This unit is capable of paving 3½" above grade and 6" below grade. The special clamps allow quick attchment to virtually any bucket lip without tools. The unit quickly adjusts from 12" to 20" paving widths. Unit sizes up to 40" are available with the optional extension kit. |
Asphalt Cutters
 |
|
| A choice of models, the Model 16 for loader-backhoes or loaders up to 2½ cu.yd., the Model 18 for excavators or loaders of any size, and the Model 1600S which will mount directly on the scarifier block of most motor graders. The frames of the Model 16 & 18 is designed to fit over or between the teeth. The Model 16 & 1600S are designed for an applied down-pressure of 20,000 lbs and the Model 18 for 50,000 lbs. All models have hardened, abrasion resistant alloy cutting wheels. Because no adapters are required for mounting, one cutter can be used on a variety of machines at several locations. Mounting time is only one or two minutes and no tools are needed. |
| Model | 16 | 1600S | 18 |
|---|---|---|---|
| Cutting Wheel Dia. | 16" | 16" | 18" |
| Max Cutting Depth | 5¾" | 5¾" | 5½" |
| Inside Frame Space, Vert | 3¾" | - | 6" |
| Inside Frame Space, Horiz | 3 3/8" | - | 6 1/8" |
| Outside Frame Width, Horiz | 5" | - | 7 3/8" |
| Inside Shank Spacing, Horiz | - | 9"-9½" | - |
| Shank Size | - | 1" x 2½" | - |
| Net Weight | 126 lbs | 85 lbs | 282 lbs |
*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
|
Industrial Main Page ABC Groff Main Page | ||||