Dymax Skid Steer Forks

Skid Steer Forks

Pallet Forks with Hydraulic Tines

Tine Length	Tine Dimensions	Capacity	Weight
42"	1¼" x 4"	3500 lbs	490 lbs
42"	1½" x 4"	5000 lbs	515 lbs
48"	1¼" x 4"	3500 lbs	520 lbs
48"	1½" x 4"	5000 lbs	550 lbs

Dymax Pallet Forks with Hydraulically Adjustable Tines for Skid-Steer Loaders and Small Wheel Loaders are perfect for loading, moving and handling unusual sized pallets.
Hydraulically Adjustable Pallet Forks feature two hydraulic cylinders that easily adjust the tines, eliminating labor and lost time associated with manual adjustments.
Pallet Forks with Hydraulically Adjustable Tines provide a measure of safety, eliminating the risk of pinched fingers and hands, as well as reducing the likelihood of strained backs that come from lifting and manually adjusting tines.
Machines require an additional hydraulic circuit for operation of the adjustable tines.
Tines are available in both 42" and 48" lengths.
Tines are available in either 3,500 lb. or 5,000 lb. capacities. Other capacities are also available.


Heavy Duty Model	Standard Model

The Dymax Stacking Forks for Skid Steer Loaders, Small Wheel Loaders and Telescopic Handlers feature heavy duty construction to match the power of the machines, including new, higher horsepower models.
The Dymax Standard Stacking Fork provides a four-tine full-width top clamp, and is the ideal tool for stacking brush, moving large bales and other bulky material.
The Dymax Heavy Duty Stacking Fork is designed with two reinforced top clamps and is matched to extreme applications.
Heavy Duty Stacking Forks are ideal for thicker brush, limbs and small trees.
Additional hydraulics may be required.

Designed and built for years of durability in tough working conditions.
Ideal for applications that range from housing site development to logging.
The unique design is well suited to logging applications, as the two individual top clamps close inside the tines, bringing the logs closer to the carriage for greater stability.
Top clamps are independent of each other, providing better grabbing action for uneven loads.
I-beam design of top clamps insures structural integrity.
With the top clamps open, it can be used in a multitude of other applications otherwise calling for a traditional pallet fork,
The non-swinging tines are available in three lengths for handling, stacking and loading sawn logs, as well as more typical pallet fork applications.

Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191 Toll free: 1-800-346-8319	Fax: (717) 355-2272 Email: sales@abcgroff.com