Skid Steer Street Swipe

Dual rubber blades easily wipe up wet, muddy & slick areas such as roads & barges.


  • Dual heavy duty rubber blades
  • Fits any skid steer
  • Hydraulic power angle
  • Length:  84"
  • Weight:  860 lbs.

Currently in use cleaning construction and demolition sites, wet muddy streets, paved lots, stalls, animal pens and cargo barges. It can also be used in final grading for gravel driveways, landscaping where a danger exists of damaging water meters, concrete sidewalks, driveways and foundations. Won't hang up on curbs, manhole covers or steps in the pavement.

Mud, silt and river debris on flooded streets are quickly "squeegeed clean". Material or debris can be pushed straightforward and backward or windrowed by use of the power angle feature.

Not just for cleaning wet areas. On dry areas, a broom will create a large amount of unhealthy dust. Also brooms are expensive to repair. Not the Street Swipe! It cleans-up dried dirt and silica with a minimal amount of dust. Rubber edges are reasonably priced and easily replaced.

The Street Swipe is shipped complete. It is easily assembled with standard hand tools, and ready to hook up to any skid steer loader with a universal style attachment bracket. Hydraulic hose ends are the universal flat face type.

Street Swipe is equipped with four rubber edges. Rubber edges last 80-100 hours house in dry use and longer in a "wet" environment. After the front rubber edge is worn simply unpin the head assembly and reattach to the opposite side. When both of the bottom rubbers are worn, simply remove the bolts from the bar assembly then flip it to the two unused new rubber edges.




Heavy Duty Brush Cutter

Model DL-66
Cutting Width 66"
Overall Width 70"
Overall Height 41½"
Overall Length 81"
Weight 1500 lbs
Cutting Capacity Up to 7"
Blades 4

The DL-66 is a heavy duty rotary cutter built to handle extreme brush cutting jobs. A reinforced front push bar enables the operator to push over trees and cut brush up to 7" in diameter. The DL-66 is built to fit any skid loader running 22 to 40 gpm. As you cut, the front chained intake door lifts and allows the tree to enter the blade area. There are no void areas on the underside of the deck to hold material. The extra 3/8" steel deck sides are reinforced and set on seven specially designed replaceable AR400 skid shoes.



*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.

Contact A.B.C. Groff for more product information.
110 South Railroad Ave.
New Holland, PA 17557
Email: sales@abcgroff.com
Phone: (717) 354-4191
Toll free: 1-800-346-8319
Fax: (717) 355-2272
Industrial Main Page

ABC Groff Main Page