Stone Fork - "Pick up and keep". The distinctive design provides considerable potential to fill the implement without dropping any of the stones already in the bucket. At the front end are mounted special, downwardspointing tines made of Hardox steel. After many hours of hard work, it is then easy to replace these tines. The cross tubes (2x4 in) stabilize the 1.2 inch tines.

Series HT - These buckets have the same solid design of the H series and are equipped with welded teeth. The larger HT-buckets are equipped with extra reinforcement between the back and base.

Series HV - The perfect bucket for anyone needing a strong bucket with great depth and high volume. Basic design as Series H and HT. The larger HV buckets are equipped with extra-strong ends and cutting edges.

Series HD - Contractors bucket. This is the sturdiest bucket in our range together with our HDV buckets. This bucket is based on the H bucket. On the 210, 240 and 260 versions the steel is 20% thicker. Also, the HD buckets have thicker cutting edges, wider and longer bottom reinforcements, an extra angle reinforcement inside the bucket next to the implement hooks as well as an angled wear-plate at the back of the bucket.

Series HDV - These volume buckets are designed for professional users with larger tractors that use them a lot and/or lift heavy weights and who therefore have severe requirements for ruggedness and durability. The obviously sturdy design is noticeable in the steel plates that are 20% thicker compared to our other HV versions.

Series L - A very reasonably priced bucket, especially adapted for users with fewer and lighter tasks for which a functional bucket is more important than the top technical features.

Series LV - Excellent for handling of grain, artifical fertiliser, fuel pellets and other light, voluminous materials. Also suitable for snow clearance on your own property.

Grading Bucket - A heavy-duty grading bucket. The operator has a perfect view of the tip of the bucket thanks to the low back plate and the long, strong bottom plate. The bucket has a 20 mm heavy duty cutting edge. At the rear, under the 20 mm mounting plates is a welded 10 mm angle iron, which reinforces the bucket for grading jobs.

High Tip Bucket - The high tip bucket increases the unloading height by 47 inches. That means that even a short and compact front loader can fill a tall trailer when needed. The bucket pivots at the front edge, and therefore it is not necessary to wait for the front edge to be over the side of truck/ trailer before you reverse. This saves time and increases the efficiency. High tip buckets are used for handling high volume materials high up, for example loading grains, grass seed, beets or wood chips.