Mid Range Impact Hammers

For Small to Medium Excavators & Large Backhoe/Loaders

Sandvik Mid Range breakers are designed to tackle tough jobs - bridge demolition, sizing oversize boulders, recycling, underwater demolition, trenching and much more.

Unique features make the Sandvik Mid Range the perfect match for mid-sized carriers. With these products, you can be assured of long life with minimal maintenance.

  • Standard and City Versions - Flexibility in choosing the correct hammer for your application
  • Slip fit wear bushings
    • Easy installation and replacement
    • Can be rotated 90° for extended life
    • Lubrication grooves for enhanced lubrication
  • Heavy duty, reinforced box
    • Protects power cell
    • Quieter operation
    • Streamline design for better visibility

Model BR2064 BR2266 BR2155 BR2568 BR2577
Impact Energy Class 2000 ft-lb 2500 ft-lb 3000 ft-lb 3500 ft-lb 4000 ft-lb
Carrier Weight (tons) 13.5 - 22 20 - 28.5 17.6 - 28.6 23 - 35.5 23.1 - 33
Blows per Minute 400-700 360-650 490-780 330-580 450-750
Hydraulic Flow Required 18-35 gpm 26-45 gpm 32-48 gpm 32-53 gpm 37-53 gpm
Hydraulic Pressure 2685 psi 2760 psi 2300 psi 2760 psi 2100 psi
Tool Diameter 4.17" 4.50" 4.65" 5.12" 5.31"
Working Weight 2300 lbs 2900 lbs 2770 lbs 2900 lbs 3880 lbs





Large Range Impact Hammers

For Large Excavators

Sandvik Large Range, designed for the hardest of jobs, offers the perfect solutions for breaking oversize boulders, slag removal, tunnelling, open pit mining, secondary breaking and trenching.

The Sandvik Large Range, comes with many design feature advantages:

  • Heavy Duty Housing Design
    • Reinforced for extended life and severe duty
    • Replaceable heavy duty boot made of HARDOX 400 abrasion resistant material
  • Top Down Lubrication and Underwater Adaptation Standard - Lubrication and air passages built in for easy installation of remote lubricators and airlines for under water work
  • Slip Fit Tool Bushings
    • Easy to replace when worn
    • Can rotate 90° for extended life
    • Grease grooves provide improved lubrication and act as visual wear indicators
  • Additional features - Pro Controller

Model BR3088 BR3890 BR4511 BR7013
Std Pro Std Pro Std Pro Std
Impact Energy Class, ft-lb 5500 7000 7500 9000 12,000 12,000 16,000
Carrier Weight, tons 30-44 30-44 38.5-60.5 38.5-60.5 44-77 44-77 65-110
Blows per Minute 300-480 300-625 300-480 300-630 300-480 300-700 350-450
Hyd. Flow Required, gpm 42-60 42-60 55-82 55-82 58-92 58-92 79-105
Hydraulic Pressure, psi 2180 2320 2180 2320 2250 2390 2460
Tool Diameter 5.59" 5.59" 6.3" 6.3" 6.9" 6.9" 8.0"
Working Weight, lbs 5225 5225 6950 6950 8400 8400 15,500




Hy-Ram Impact Hammers

Allied has combined performance, efficiency and reliability in their all-new boom-mounted Hy-Ram impact hammer to offer several design advantages over other hammer manufacturers. The large, medium, small and mini-size Hy-Ram models are available in 12 different models ranging from working weights of 265 to 8,375 pounds and tool diameters of 1.77 to 6.88 inches.

  • Simple, proven design - With continuous improvements over the years, the Allied Hy-Ram still uses the same simple, proven design that first gained industry-wide acceptance for the hydraulic hammer concept.
  • Oil and gas operation - One of the many features that contribute to the efficiency of the Allied Hy-Ram is the oil and gas operation. The Allied design of gas-assist using low pressure nitrogen improves the efficiency by reducing demand on the carrier's hydraulic system. There is no dependency on hydraulic accumulators. The accumulators are merely used to eliminate hydraulic "spikes". And, pressurized oil is always present at the bottom of the piston which prevents internal cavitation.
  • Long stroke design - Another feature that contributes to the reliability of the Allied Hy-Ram is the long-stroke design which minimizes recoil, reduces vibration and eliminates mechanical springs.
  • Auto-Stop - The Allied medium and large Hy-Rams also have an automatic Auto-Stop feature that prevents blank-firing once the demolition tool has penetrated through the material being broken and down-pressure is no longer applied.
  • Durable housing design - The Allied Hy-Rams feature a durable housing design that suspends the internal working body inside a full-box enclosure to protect the hammer, reduce noise and minimize vibration and wear to the carrier. The durable housing design is enclosed at the bottom and incorporates a heavy-duty Hardox rock claw.
  • AutoLube - Hy-Rams can also have an optional AutoLube mounted on the hammer housing which is an automatic lubrication system that dispenses lubricant by the hammer’s vibration. The AutoLube uses a high-grade chisel paste in handy replaceable cartridges.
  • Installation Kits - The Hy-Ram, which operates off of the carrier's hydraulic system, requires an installation kit in order to be mounted on the backhoe/loader, excavator or similar carrier. Allied offers over 2,500 installation kits to fit virtually every make and model carrier.

Model HR25 HR50 HR75 HR100 HR150 HR200
Impact Energy Class, ft-lb 250 500 750 1000 1500 2000
Carrier Weight, tons 1.5-4 2-5 2.5-8.5 4-15 7-15 8-20
Hyd. Flow Required, gpm 4-8 7-13 8-16 11-21 13-26 20-32
Working Weight, lbs 265 386 574 728 1200 1765

Model HR300 HR400 HR500 HR750 HR1000 HR1200
Impact Energy Class, ft-lb 3000 4000 5000 7500 10,000 12,000
Carrier Weight, tons 15.5-21 20-31 22-38 36-50 45-66.5 55-95
Hyd. Flow Required, gpm 26-40 26-41 37-50 53-69 58-74 63-85
Working Weight, lbs 2535 3200 3970 5950 7275 8375



*Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.
Contact Ag Industrial for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@agindustrial.com
 Industrial Equipment
Ag Industrial Main Page