Disc Mowers & Tedders

Disc Mowers

Designed to play tough

Fire ant hills, gopher mounds and thick, wet grasses are no match for New Holland disc mowers. They're designed to breeze through the toughest conditions with non-stop, trouble-free cutting for a clean, even cut in less time.


  Economy Heavy-Duty
Model HM234 HM235 HM236 H6730 H6740 H6750 H6830
Cutting Width 5' 6" 6' 9" 7' 11" 6' 8" 7' 10" 9' 2" 10' 4"
Overall Width 5' 6" 6' 9" 7' 11" 11' 7" 13' 4" 15' 2" 16' 4"
Cutter Bar Tilt Angle 0° to -8° 1° to -8° 2° to -10° 0° to -10° 0° to -10° 0° to -10° -2° to -10°
Number of Discs 4 5 6 5 6 7 8
Disc Speed 3154 rpm 3000 rpm 2835 rpm
3-Point Hitch Cat I/II Cat I/II Cat II Cat I/II Cat II Cat II Cat II
PTO HP Required 35+ 40+ 50+ 45+ 55+ 60+ 60+
Operating Weight 822 lbs 905 lbs 1077 lbs 1200 lbs 1405 lbs 1535 lbs 2540 lbs

  • H6000 Series heavy-duty disc mowers feature the latest true modular cutterbar innovation from New Holland—the MowMax cutterbar. MowMax cutterbars are equipped with the ShockPRO cutterbar protection system for increased durability and fast servicing. The new H6830 heavy-duty pull-type disc mower also features the MowMax cutterbar, makes a 10 ft. 4 in. cut and allows for ultra-easy hookup.

  • HM200 Series economy disc mowers are perfect for difficult cutting conditions, yet easy on your wallet. Available in cutting widths from 5 ft. 6 in. to 7 ft. 11 in., they’re compatible with lower horsepower tractors, provide long service life and are easy to maintain. And, their lower overall weight makes hookup easy.



Tedders
If you're in a race against bad weather, a New Holland tedder can increase your odds. A tedder fluffs up hay so air flows through it, not over it, to speed drying and allow you to bale sooner—before it rains. And, if showers do hit when you have windrows or swaths in the field, your tedder can spread damp, matted-down crop, distributing it evenly for quick drying.

Model 163 H5270
Number of rotors 4 6
Tines per rotor 6 7
Operating width 17' 9" 25' 7"
Tedding width 16' 5" 27' 7"
Transport width 9' 6" 9' 10"
Weight 905 lbs 1874 lbs
Tires 15 x 6 (2)18x8.50-8/
(4)16x16.50-8
PTO Tractor requirement 20 hp 35 hp
PTO slip clutch Standard Standard
Tractor attachment Towed Towed

  • The new hydraulic-fold H5270 tedder replaces the Model 169 and is New Holland's largest tedder model ever, using six seven-arm rotors to cover a 25 ft. 7 in. width.
  • The new fold-over design reduces transport width to a narrow 9 ft. 10 in., with a transport height of 10 ft.
  • The four-rotor 163 tedder covers a 16 ft. 5 in. width, yet folds to 9 ft. 6 in. to maneuver easily through gates or narrow roadways. Both mechanical and hydraulic frame fold versions are available. The hydraulic version saves time by letting you fold the outer rotors into a vertical position for narrow transport and control the rotor tilt angle right from your tractor seat. Just one tractor remote valve is required for operation.
  • The mounted two-rotor 157 tedder fluffs a 8 ft. 6 in. swath and maneuvers easily around smaller fields. The left-hand rotor tine bar flips up for narrow 8-ft. transport.
  • A handy crank or remote hydraulic control (157 and 163 mechanical, remote hydraulic on the 163 hydraulic and H5270) lets you fine-tune the tine height in seconds without tools.
  • A spindle/axle adjusting system (163 and H5270) lets you easily position the wheels for field or transport, right- or left-side tedding, or adjust the tilt of the rotors.
  • The fully-articulated frame (163 and H5270) hugs ground contours so tines handle all the crop without mixing soil into the hay.
  • Flotation tires mean better ground gauging and faster ground speeds in rough conditions.
  • Multi-finger couplings (163 and H5270) are virtually maintenance free, offering high resistance to wear and eliminating open universal joints. Workloads are spread evenly over 12 intermeshing forged and heat-treated fingers.
  • Slip clutch helps protect against damage from obstructions in the field.
  • Safety barriers in front of the rotor assemblies provide protection to bystanders.
  • Convenient PTO cradle holds PTO shaft when unit is parked to keep the PTO connection up and out of the dirt.


*Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.
Contact Ag Industrial for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@agindustrial.com
 Ag Equipment
Ag Industrial Main Page