 |
 |
Food Plot Seeder
The solution for wildlife food plots
 |
|
| Brillion has applied its years of experience as a leader in the agricultural and landscape seeder industry to the FPS-6/FPSB-6 Food Plot Seeder. The Food Plot Seeder is designed to operate under a wide variety of conditions and plant numerous grasses, legumes, small grains, and other blends and mixes. The key to postive seeding results is optimum seed to soil contact. The FPS-6/FPSB-6 has the features to provide the necessary seedbed preparation, the seed metering and placement, as well as seedbed finishing, all of which provide a state of the art food plot. |
| Model | FPS-6 | FPST-6 | ||||
|---|---|---|---|---|---|---|
| Working Width | 6' | 6' | ||||
| Transport Width | 6' 10" | 7' 11" | ||||
| Overall Height | 3' 5" | 3' 9" | ||||
| Overall Length | 5' 8" | 9' 2" | ||||
| Tire Size | n/a | 4.80x12 | ||||
| Hydraulic Lift | n/a | standard | ||||
| Disc Assembly | ||||||
| Blade Spacing | 7.5" | 7.5" | ||||
| Main Blade Size | 18" | 18" | ||||
| End Blade Size | 16" | 16" | ||||
| Angle of Operation | 10° and 15° | 10° and 15° | ||||
| Harrow Assembly | ||||||
| Tooth Bars | 2 | 2 | ||||
| Tooth Spacing | 7.5" | 7.5" | ||||
| Tooth Depth | 0-3" | 0-3" | ||||
| Seeder Assembly | ||||||
| Seed Box Capacity | 2.625 bu. | 2.625 bu. | ||||
| Seed Meters | "Micro-Meter" and/or Brush Agitator | |||||
| Seed Meter Drive | Ground Drive | Ground Drive | ||||
| Meter Opening Spacing | 4" or 6" | 4" or 6" | ||||
| Pulverizer Assembly | ||||||
| Working Width | 6' | 6' | ||||
| Pulverizer Wheels | 9.5" | 9.5" | ||||
| Number of Wheels | 31 | 31 | ||||
| Horsepower Requirement | 35 hp | 35 hp | ||||
| Operating Speed | 3-5 mph | 3-5 mph | ||||
Till 'N Seed
 |
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Skid Steer Landscape Seeder
 |
|
|
The Brillion LSS6 Skid Steer Landscape Seeder is a bi-directional seeder with a three-point hitch that can be attached to the front or rear of the seeder frame. A skid steer quick-attach mounting plate is standard equipment. Depending on the choice of mounting, the seeder can be either pushed or pulled by the skid steer. In addition, the seeder will also mount to tractors with a standard Cat. 1 three-point hitch. This quick-attach mounting plate allows center mounting and also has a 5" offset feature that allows the seeder to be used on skid steer units with wheel tracks wider than 72". The LSS6 features the "blade agitator metering system". This field proven system, which allows the metering of a wide variety of seed sizes with seed rates from very light to very heavy, is noted for accuracy and reliability. |
| *Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer. |
| Ag Equipment | ||||
| Ag Industrial Main Page | |||||