Professional Zero Turn Mowers

Bush Hog Professional Series Zero Turn Mowers give you an extra competitive edge--everywhere it counts. They are more comfortable for long hours, faster to save time, carry more fuel to prevent interruptions, follow ground contours to deliver a superior cut. They deliver the 15 Bush Hog TOUGH features of the Commercial Series plus 10 Bush Hog TOUGH Professional Series Features.

  • Front axle pivots 5 degrees up and down to reduce scalping and deck wear. The Bush Hog pivoting axle also delivers a smoother ride, more traction and better control as it keeps all four wheels on the ground in undulating terrain and when climbing curbs. Bush Hog design improves cut, reduces operator fatigue and lowers machine wear and tear.
  • Deck suspended from front axle to provide better contour following and immediate response to high spots. Easy to level using convenient deck slots.
  • Choice of 55, 61 and 73-inch wide decks to match your job. All Professional Series decks are built of the same 7-gauge steel used for decks on Bush Hog heavy-duty mowers that maintain roadsides. Decks are fabricated and reinforced for extra strength and feature wraparound reinforcement bars on both sides and folded lip on front.
  • Extra large 16 cc HydroGear pumps deliver extra ground speed and superior responsiveness to operator inputs. All the hydraulic system components are sized to provide long life. 2900 PSI relief valves protect the system against shock loads and extend system life. Large 7-inch shielded fan provides cooling.
  • Choice of powerful engines. 25-hp Kawasaki® FH721V, 27-hp Kohler® Command Pro, 28-hp Kohler® Command Pro EFI, 30-hp Kohler® Command Pro engines have world-wide reputations for reliability.
  • Self-adjusting electromagnetic Warner® MagStop® clutch rated at 200 ft lbs transmits full engine torque to the spindles through Kevlar reinforced belt. Clutch meets exacting specifications for the Professional Series.
  • Large 15-1/2 gal fuel capacity on 61-inch and 73-inch models. 12-1/2 gal fuel capacity on 55-inch deck models. All tanks are rugged roto-molded polyethylene and are equipped with sight lines and large fuel caps.
  • Castering anti-scap rollers on 73-inch decks add to controllability and avoid scalping.
  • Oversize 2-inch tall idler provides self-alignment of belt from high to low grass cutting height.
  • Made for high speed transport. Frame, hydraulics and other components matched for high speed transport of 14 mph.

Model Engine Deck Width x Length Weight
PZ2555  25-hp Kawasaki FH72IV 55" 67" x 82" 1300 lbs
PZ2561  25-hp Kawasaki FH72IV 61" 73" x 85" 1400 lbs
PZ2755  27-hp Kohler Command Pro 55" 67" x 82" 1300 lbs
PZ2861  28-hp Kohler Command Pro EFI 61" 73" x 85" 1410 lbs
PZ2873  28-hp Kohler Command Pro EFI 73" 85" x 88" 1550 lbs
PZ3061  30-hp Kohler Command Pro 61" 73" x 85" 1400 lbs
PZ3073  30-hp Kohler Command Pro 73" 85" x 88" 1550 lbs

Vehicle All Models
Drive System  Dual Hydro Gear variable displacement pumps and high efficiency
 Hydro-Gear motors. 1.0 gallon reservoir. Cooling fans with each pump.
Brakes  Hydro provides dynamic braking; disc-type parking brake
Electrical System  12 volt; electric start
Steering/Motor Control  Dampened twin levers, adjustable fore and aft and vertically
Front Caster Tires  13 x 6.5-6 4-ply tubeless
Drive Tire  24 x 9.5-12 (55" decks), 24 x 12-12 (61" & 73" decks), TurfTrac 4-ply
Speed  Infinitely variable from 0-14 mph forward
PTO Engagement  Mag Stop Electromagnetic clutch rated at 200 ft-lbs
Fuel Capacity  Twin fuel tanks; 12.5 gal (55" decks), 15.5 (61" & 73" decks)
Decks All Models
Style  7-gauge steel, fully floating, 5½" deep side discharge
Deck Lift  Quick Foot height adjustment from the seat
Blades  ¼" thick, heat treated high alloy steel, High Lift
Cutting Height  1½" to 5" adjustable in ¼" increments
Blade Tip Speed  18,500 fpm



Home Zero Turn Mowers

For Any Homeowner Who Wants to Save Time

  • 17.5 to 20 HP Briggs & Stratton or Kohler Engines
  • Infinitely Variable Speeds - 0 to 7 MPH
  • 8 Gallon Fuel Capacity
  • 36" & 42" Cutting Widths With Reinforced Steel Decks
  • Blade Tip Speeds Up To 18,300 FPM
  • High Back, Foam Padded Seat With Flip-Up Arm Rests & Seat Slides
  • Three Year Limited Warranty

Model Deck Engine
HS1736 36"  17.5-hp Briggs & Stratton Intek OHV
HS1836 36"  18.0-hp Briggs & Stratton Intek V-Twin
HS1742 42"  17.5-hp Briggs & Stratton Intek OHV
HS1842 42"  18.0-hp Briggs & Stratton Intek V-Twin
HS2042 42"  20.0-hp Kohler Courage OHV V-Twin

Vehicle All Models
Drive System  Dual Hydrostats, Hydro-Gear EZT's with large 7" cooling fans
Brakes  Hydrostats provide dynamic braking; parking brake
Steering/Motor Control  Dampened twin levers, adjustable fore and aft and vertically
Front Caster Tires  11 x 4.0 - 5 tubeless, turf type
Drive Tire  18 x 8.5 - 8 tubeless, turf type
Speed  Infinitely variable from 0-7 mph forward
PTO Engagement  Mag Stop Electromagnetic clutch rated at 105 ft-lbs
Fuel Capacity  8 gallons; twin fuel tanks
Decks All Models
Style  2 spindle, 11-gauge reinforced steel, fully floating, 4½" deep side discharge
Deck Lift  Foot-assisted height adjustment from the seat
Blades  .204" thick, heat treated steel, Hi Lift Fusion blades
Cutting Height  1½" to 4½" adjustable in ¼" increments
Blade Tip Speed  18,300 fpm (42" deck)


*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@abcgroff.com
 L&G Equipment
ABC Groff Main Page