Ditchers

All Art's Way ditchers are ideal for either irrigation or drainage channels since the wide range of adjustments permit narrow or wide, shallow or deep ditches.

Models D5 & D7
	The D5 and D7 ditchers are pull-behind, mounted on rubber tires, and consists of either a five foot or seven foot wing and the carrier assembly. It operates with either (2) 8 inch stroke cylinders, or a mechanical ratchet jack can be substituted for the front cylinder which regulates the shape, or width, of the ditch. Digs and cleans ditches up to 68" wide. Set carrier for flat, wide ditches, or for steep, narrow ditches.
Models H4, H5 & H7
	The H5 and H7 ditchers are 3-point mounted, which consists of either a five foot or seven foot wing assembly with a heavier tripod designed to accomodate either Cat 2 or 3 hitches. Operates with standard 8" stroke cylinder or optional heavy-duty adjustment screw. The H4 is rugged construction, low cost - no maintenance ditcher. Fast, easy to operate, 3-pt Cat 1 hitch.
Models H5ER & H7ER
	The H5ER and H7ER ditchers consists of either a five foot or seven foot wing assembly installed on the C-3ER tripod. The C-3ER is designed as "extended range" to permit much greater adjustment of ditch depth and width. and transport clearance. This tripod is installed on Cat 2 or 3 hitches and is operated with (2) 8" stroke cylinders or one cylinder for depth control, and a heavy-duty adjusting screw for the width, or angle adjustment.

Model	D5	D7	H4	H5	H7	H5ER	H7ER
Hitch Type	pull	pull	3-pt	3-pt	3-pt	3-pt	3-pt
Ditch Width	68"	84"	43"	68"	84"	68"	84"
Ditch Depth	33"	33"	20"	33"	33"	53"	53"
Weight	783 lbs	888 lbs	320 lbs	771 lbs	876 lbs	941 lbs	1046 lbs
Max HP	100 hp	100 hp	45 hp	100 hp	100 hp	100 hp	100 hp

Grain Drills

Model	5310	5312	5315
Seeding Width	10'	12'	15'
Transport Width	10'	12'	15'
Field Position Length w/Hitch	16'	16'	16'
Row Spacing	7½" or 8"	7½" or 8"	7½" or 8"
Openers & Coulters @ 7½" Spacing	15	19	23
Openers & Coulters @ 8" Spacing	13	17	21
Empty Weight w/Openers @ 7½"	5600 lbs	6500 lbs	7600 lbs
Opener Down Pressure	Up to 350 lbs per opener
No-Till Coulters	Rippled or Fluted
Seed Box Capacity	26 bu.	31 bu.	39 bu.
Minimum HP Required	60 hp	72 hp	90 hp
Seed Rate	5-235 lbs	5-235 lbs	5-235 lbs
Press Wheel	2x13 / 3x13 / 4x12
Tires	11Lx15 8 ply	12.5Lx15 8 ply

Flail Shredders

Proven, Field Tested Design, Built For Better Shredding

Durable hitch Heavy duty PTO Jack stand pivots up and out of the way Adjustable cutter bar for superior shredding Cupped knife design creates a suction that vacuums materials up into the cutting chamber Proven, high horsepower gearbox provides years of low maintenance Double spherical roller bearing on drive end Heavy duty, wear resistant shroud External grease line for all rotor bearings Lock collar extends over outer race of center bearing to reduce bearing contamination Center rotor bearing so rotors can be removed individually Easy adjust carrier wheel design for added stability Backside idlers reduce slippage and extend belt life

Model	180B	240B
Cutting Width	15'	20'
Lap 40" Rows	--	20"
Lap 30" Rows	15"	15"
Minimum HP Required	75 hp	100 hp
Knives	(96) 6½"	(128) 5"
Gearbox	200 hp	200 hp
Overall Dimensions	195" x 120"	260" x 120"
Approximate Weight	2690 lbs	4000 lbs

*Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.

Contact Ag Industrial for more product information. Phone: (717) 354-4191 Toll free: 1-800-346-8319 Fax: (717) 355-2272 Email: sales@agindustrial.com	Ag Equipment
	Ag Industrial Main Page